Mesasuring and Control Technology

The appropriate quantity makes it …

To comply with norms and statutory provisions and to meet the required water equivalents appropriate measuring and control technology has to be applied.
With our components you are able to control the following influencing values:

– quantity (addition, flow rate)
– conductivity
– pH value

  • tightly arranged device with microprocessor technology
    1 channel + temperature (depending on model)
    highest process relliability with widespread scope of application
    suitable for wall fastening in housing IP 65
    also available for frontage board installation (96 x 96 mm)
    proportional pulse frequency outlet (for dosing pump control)
    output relay
    stand-by input

    LDPH housing IP 65 pH measurement
    LDRH housing IP 65 redox measurement
    LDCD housing IP 65 conductivity measurement
    LDCL housing IP 65 Cl2 measurement

    JCPH front 96 x 96 mm pH measurement
    JCRH front 96 x 96 mm redox measurement
    JCCD front 96 x 96 mm conductivity measurement
    JCCL front 96 x 96 mm Cl2 measurement

    suitable for parameter monitoring in liquid analysis
    Example of use: cooling towers, pH, Cl2 or redox measurement with concurrent monitoring of threshold values

  • tightly arranged device with microprocessor technology
    2 channel + temperature (depending on model)
    first channel pH measurement
    temperature compensated measurement
    innovative user interface with click wheel
    highest process relliability with widespread scope of application
    suitable for wall fastening in housing IP 65
    proportional pulse frequency outlet (for dosing pump control)
    output relay
    power output 4-20 mA (optional)
    stand-by input

    LDPHRH pH + redox measurement
    LDPHCL pH + Cl2 measurement
    LDPHCD pH + conductivity measurement
    LDPHCDIND pH + inductive conductometry

    suitable for parameter monitoring in liquid analysis
    Example of use: cooling towers, chlorine, conductivity or redox potential – measurements with concurrent monitoring of the pH value

  • tightly arranged device with microprocessor technology
    5 channel + temperature
    innovative user interface with click wheel
    also available with telemaintenance (USB – RS485 – ETHERNET – GSM – INTERNET)
    highest process relliability with widespread scope of application
    suitable for wall fastening
    proportional pulse frequency outlet (for dosing pump control)
    output relay
    stand-by input

    MAX 5 temperature + up to 5 of the following indicators:
    – pH
    – redox potential
    – conductivity
    – turbidity
    – dissolved oxygen
    – chlorine dioxide
    – free chlorine
    – total chlorine
    – organic chlorine
    – ozone
    – bromine
    – hydrogen peroxide

    suitable for parameter monitoring in liquid analysis
    Example of use: whenever several parameters shall be measured cost-efficient

  • tightly arranged device with microprocessor technology
    monitoring of all parameters of the pre-configured user-specific system
    2 channel + temperature
    innovative user interface with click wheel
    highest process relliability with widespread scope of application
    suitable for wall fastening
    proportional pulse frequency outlet (for dosing pump control)
    output relay
    power output 4-20 mA (optional)
    stand-by input

    MTOWER temperature + up to 2 of the following indicators (conductive electrode)
    MTOWERIND temperature + up to 2 of the following indicators (inductive electrode)

    – conductivity
    – pH
    – redox potential
    – chlorine

    Example of use: cooling towers

  • tightly arranged device with microprocessor technology
    monitoring of all parameters of the pre-configured user-specific system
    3 channel + temperature
    innovative user interface with click wheel
    also available with telemaintenance (USB – RS485 – ETHERNET – GSM – INTERNET)
    highest process relliability with widespread scope of application
    suitable for wall fastening
    proportional pulse frequency outlet (for dosing pump control)
    output relay
    power output 4-20 mA (optional)
    stand-by input

    MTOWER+ temperature + up to 3 of the following indicators (conductive electrode)
    MTOWERIND+ temperature + up to 3 of the following indicators (inductive electrode)

    – conductivity
    – pH
    – redox potential
    – chlorine

    Example of use: cooling towers

  • inductive conductivity measuring probes
    conductive conductivity cells
    pH / redox electrodes
    opene or membrane coated amperometric measuring cells
    filters for the measuring sections
    fittings, electrode supports,…